Turning the ADVISOR On

Press the "On/Reset" button

Pager will alert for 4 seconds.

"On Indicator" will appear in the upper left corner of the display.

The pager is ready to receive messages.

Turning the ADVISOR Off

Press the "On/Reset" button until "PUSH FOR OFF" appears on the screen.

While this message is still displayed, press the "Function" button to turn Off.

Receiving Messages

To alert you of an incoming message, your pager will beep or vibrate, the red light will flash, and the incoming-message symbol will be displayed for 12 seconds. Press any button to cancel the alert.

An arrow on the display shows the locations of messages that are in memory. Unread messages are indicated by flashing arrows. The cursor is automatically pointing to the most recent message.

Use the left and right arrow buttons to select the message you wish to read.

Press the "Read" button. Your message will be displayed, preceded by the memory location (a number between 1 and 20).

The pager will automatically scroll through messages for you at a rate of 4 seconds per screen. To manually scroll, press the "Read" button a second time. Subsequent presses of the "Read" button will take you through the message screens.

Messages can be read one line at a time by using the up and down arrow buttons to scroll through it.

Backlighting

To activate the backlight press the function button and hold it for one second. The backlight will turn on. To turn off the backlight, you can hold down the function button again for one second, or let the pager time out when you are through with the desired function.

Function Menu

To Activate the Function Menu:

Press the Function Button once.

Choose a particular function by using the left or right direction controls (i.e.: the arrows) until the desired function is flashing.

Press the Function Button again to activate.

Speaker Function

This function is used to set the ADVISOR pager to either the audible or the vibrate mode of operation. To change the speaker function:

Select the speaker symbol in the function menu and press the Function Button.

The pager will vibrate or chirp depending on which mode is selected.

NOTE: If the pager is in the audible mode, a speaker symbol will appear in the lower left corner of the screen.

Clock Function

This function is used to change the time and date stored in the pager.

Select the clock symbol on the menu, then press the "Function" button.

The screen will display the time, day, month, and year. Use the left and right arrow buttons to select the field to change, then use the up and down arrow buttons to change the value.

Press the "Function" button to save the changes you have made.

Alarm Function

This function is used to set the built-in alarm.

Select the alarm symbol on the menu, then press the "Function" button.

The screen will display the time and the alarm on/off symbol. Use the left and right arrow buttons to select the field to change, then use the up and down arrows to change the values and to turn the alarm on and off.

Press the "Function" button to save the changes you have made. If the alarm has been activated, the "alarm on" symbol will appear on the screen.

Protecting Messages

Up to ten messages can be "locked" in memory to prevent them from being replaced when the memory is full.

Press the "Read" button.

Select the message you wish to be locked by using the left or right arrows.

Press the "Function" button to display the menu at the bottom of the screen. Use the left or right directional arrows to select the lock symbol, then press the "Function" button again to lock the message.

To unlock a message, select the lock symbol in the function menu, and then press the "Function" button.

Deleting Messages

Press the "Read" button.

Select the message to delete by using the left or right arrows.

Press the "Function" button to display the menu at the bottom of the screen. Use the left or right arrows to select the "Delete" symbol, then press the "Function" button again.

The display will show "DELETE?". Press the "Function" button again to delete the message.

Personal Message File

Up to 10 messages can be transferred to and stored in the 20th memory location (right hand position on the second line of the display). This is called the Personal Message File. To transfer messages here:

Press the "Read" button.

Select the message to be transferred by using the left or right arrows.

Press the "Function" button and use the left and right arrows to choose the Personal Message File symbol. Then press the "Function" button again to transfer the message.

The arrow symbol will appear in the 20th memory location. To exit, press the up arrow.

NOTE: Messages cannot be transferred out of the Personal Message File.

Reading the Personal Message File

Press the "Read" button.

Use the down arrow to select the Personal Message File. Press the "Read button.

The pager will automatically scroll through all the messages stored in the Personal Message File. To stop and scroll through an individual message, press the "Read" button again. This will allow you to use the manual scroll feature to scroll through individual messages.

Deleting a Message from the Personal Message File

Press the "Read" button.

Use the down arrow to select the Personal Message File. Press the "Read" button.

Scroll through the messages to one you want to delete. Press the function button.

Use the left and right directional arrows to choose the "Delete" symbol. Press the "Function" button. When the "DELETE?" prompt appears, press the "Function" button again. The message will be deleted.